Split system installation sydney

Oz Air Online not only supplies the system but you can also arrange your installation online. The choice is yours, we can arrange our recommended partner licensed installers for you or can arrange your own installer.

How it works?

  1. Add the installation add-on (no upfront charge) with your split system purchase, below the 'add to cart' button on each product page.
  2. We'll arrange one of our licensed installation partners to contact you as soon as possible about your installation.
  3. A technician will then either perform a site visit or provide an online/over the phone quote to fully install the system.
  4. Your system will be delivered then installed on the agreed installation day.

How easy is that!

Click here to view all our split system air conditioners

What you can expect with a split system back to back installation

  • ARCTICK licensed and insured installer
  • Outdoor unit positioned on the ground mounted on vibration eliminating rubber pads
  • Up to 3 meters of refrigeration pipe and interconnecting cables
  • Includes 1 length of pipe cover or trunking (2m)
  • Weatherproof Electrical isolator next to outdoor unit
  • Up to 15 meters electrical supply
  • 2.5kW to 4.6kW connected to existing power circuit. 5kW - 9.5kW will require additional electrical circuit if not one already (based on Sydney, see extra table)
  • Clean up / remove all packaging and rubbish

What is back to back installation?

back to back installation

Sydney Metro

2kW - 4.6kW = $695

5kW - 7.1kW = $745

7.5kW - 9.5kW = $745

 

Melbourne Metro

2kW - 4.6kW = $745

5kW - 7.1kW = $795

7.5kW - 9.5kW = $845

 

QLD Brisbane Metro

2kW - 4.6kW = $649

5kW - 7.1kW = $749

7.5kW - 9.5kW = $799

 

Prices listed are for residential properties with reasonable site access in metro areas and back to back installation.

ADDITIONAL CHARGES WILL APPLY FOR:

  • Restricted access properties
  • Appartments and units
  • 5kW units and above (requires dedicated electrical circuit)
  • Non back to back installations
  • Regional locations

The most common extras and their standard pricing are itemised in the extras table below.

We are happy to provide advice and recommendations specific to your home should you need it. Visit our online advice form to submit details.

Sydney Metro - Installation Extras

Description of additional extra Cost inc. GST
Refrigerant/copper pipe (over 3m) per metre $25
Pipe cover/trunking (over 2m) per metre $25
Degas & disconnection of existing system (free removal) $50
New 20amp RCBO electrical circuit (up to 10m) $330
Additional cable for electrical circuit (over 10m) per metre $10/m
Polyslab or evocrete slab $50
Outdoor unit adjustable anti-vibration feet $50
Outdoor unit mounted on bracket up to 2m $110
Outdoor unit mounted on bracket over 2m
$165
Roof mounted brackets $220
Extra brick penetration double brick/brick veneer $50

 

Melbourne Metro - Installation Extras

Description of additional extra Cost inc. GST
Refrigerant/copper pipe (over 3m) per metre $25
Pipe cover/trunking (over 2m) per metre $25
Degas & disconnection of existing system (free removal) $50
New 20amp RCBO electrical circuit (up to 10m) $400
Additional cable for electrical circuit (over 10m) per metre $10/m
Polyslab or evocrete slab $50
Outdoor unit adjustable anti-vibration feet $50
Outdoor unit mounted on bracket up to 2m $110
Outdoor unit mounted on bracket over 2m
$165
Roof mounted brackets $220
Extra brick penetration double brick/brick veneer $50

 

QLD Metro - Installation Extras

Description of additional extra Cost inc. GST
Refrigerant/copper pipe (over 3m) per metre $30
Pipe cover/trunking (over 2m) per metre $30
Degas, disconnection & removal of existing system $120
RCBO Breaker under current regulations Included
Additional cable for electrical circuit (over 15m) per metre $10/m
Polyslab or evocrete slab $50
Outdoor unit adjustable anti-vibration feet $40
Outdoor unit mounted on bracket up to 1.8m $110
Side Exit Penetration (max 10cm from Corner) $60
Double Brick Penetration $70